How Much Hashrate Does My Graphics Card Get on SASEUL? How to Measure It on Screen and Estimate My Share

· Mining basics

How much hashrate does my graphics card get?

The number on your screen beats a card-name label. Divide it by the total and you have your share

Read it on the mining screen

The middle value after a few minutes, with the usage setting

Divide by the total hashrate

About 14,670 GH/s, estimated from difficulty

Estimate your share

A 1 GH/s card gets about 0.0068%

Drawn from the official explorer and pool site screens opened at around 4:24 a.m. on November 15, 2026. The share is a theoretical value that leaves out how the pool splits rewards and luck.

Graphics card name alone does not set SASEUL's hashrate. The same card can differ three or four times depending on the mining program's usage setting, so you can see your own number on the mining program's screen in a few minutes. Divide it by the total hashrate estimated from difficulty (explorer difficulty ÷ 60 seconds, the same as what saseulmine.com shows; about 14.67 TH/s on the morning of November 15, 2026) and you get your estimated share.

On the front pages of the official explorer and three pool sites, I found no table that lists card names next to hashrate (checked November 15, 2026). I have not checked per-card numbers from other mining programs. So here is how to measure and how to divide, instead of numbers.

The same card can differ three or four times depending on the usage setting

Hashrate (calculating speed, how many guesses per second) is not set by the card alone. The mining program's usage setting (how hard the card is allowed to work) swings it a lot.

The 73-day record post has daily averages from one graphics card's mining program. In August, with usage at 25%, it was about 180 to 315 MH/s. From September to October 9, at 50%, it was about 740 to 890 MH/s. From October 10 to November 1 it was also 50%, and about 550 to 860 MH/s.

The setting doubled, but the number grew by more than three times. The two periods differ in date, card temperature and driver, so I can't say exactly how many times. That is why a hashrate should always come with its usage setting.

The three pool sites I looked at show only combined numbers and profit calculators on their front pages, not per-card numbers

The front pages of these three pool sites (groups that mine together and split the reward) don't show card names. They show only combined numbers by pool and by machine. These are values I saw between 4:24 and 4:25 a.m. on November 15, 2026.

1 GH/s is 1,000 MH/s. How many cards sit in one machine is not shown on the pool front pages I looked at. So you can't work backward from these numbers to one card's value.

saseulpool.com and rabbitminer.cc have profit calculators. Enter your hashrate and they estimate the SL you would receive over 24 hours, 7 days and 30 days. The saseulpool.com screen says the figure is after the pool fee, leaves out electricity and mining program fees, and is not a guaranteed payout.

You can read your card's number on the mining program's screen in a few minutes

Start the window version of the mining program and begin mining. If it is your first install, see the Windows install walkthrough first.

  1. Open the mining screen (the Mine tab)
  2. Look at the number in the leftmost "HASHRATE" box
  3. Don't read it the moment you start. Wait a few minutes. The number keeps moving up and down
  4. Look a few times and write down the value in the middle
  5. Write down the usage (%) bar value on the same screen too
The mining screen (Mine tab) of SASEUL Miner (the mining program). The leftmost box is the calculating speed (HASHRATE); the number is blurred (it was about 860 MH/s at 50% usage at the time)
The leftmost box on the mining screen is the calculating speed (HASHRATE) (September 15, 2026, usage 50%). The exact number is blurred.
How to measure with the black window (command-line version)

In the command-line version, run this command in the mining program's folder to see the current state.

miner.exe status

The log file (miner.log) also prints lines like this: "hashrate: 703.92 MH/s (gpu 50%, …)". The gpu 50% in the brackets is the usage. Take the middle value of several such lines.

How to see your card's name and type is in the Task Manager part of the Can my PC mine SASEUL post.

Divide your hashrate by the total hashrate to estimate your share

Divide the MH/s you read on screen by 1,000 to get GH/s. Divide that by the total hashrate estimated from difficulty (GH/s) and you have your share. You can read the total in the NETWORK box on the pool site's front page, or divide the official explorer's Difficulty by 60 seconds.

On the morning of November 15, 2026, the explorer's difficulty was 800T. Converted to the usual units, that is about 14.67 TH/s, and the NETWORK box on saseulmine.com shows the same value. TH/s means 1 trillion calculations per second, and 1 TH/s is 1,000 GH/s.

As an example, take one card at 1 GH/s. 14.67 TH/s is 14,670 GH/s, so the share is 1 ÷ 14,670, about 0.0068%. At 0.8 GH/s (800 MH/s) it is about 0.0055%. These are theoretical values that leave out how the pool splits rewards and luck.

Date Total calculating speed Share of a 1 GH/s card
Oct 24 about 3.73 TH/s about 0.027%
Nov 7 about 11.87 TH/s about 0.0084%
Nov 15 about 14.67 TH/s about 0.0068%

In the 22 days from October 24 to November 15, the total became about 3.9 times bigger. The same card's share shrank to about a quarter. The 3x in 9 days post follows this trend.

If the SL released per block stays the same, the amount I receive per day is inversely proportional to difficulty. So whichever number you use, when difficulty goes up, the same card receives that much less.

Why do pool sites show different totals? (a guess)

saseulpool.com and rabbitminer.cc list difficulty as 880 T and the total calculating speed as 7.85 TH/s and 7.49 TH/s. The explorer's 800T is counted in units of 1,024, so in the usual units it becomes about 880 T. The numbers match, so it looks like the same difficulty, but that is my guess. Units are explained in the difficulty post.

Their total calculating speeds are close to 880 T divided by the average block time on each screen (112 seconds and 117.53 seconds). The calculation methods seem to differ, but that is a guess. This post uses difficulty divided by 60 seconds.

It does not mean the whole of SASEUL's power was cut in half. It is the same difficulty divided by different times (60 seconds, or the recent average block time).

So what should you do? Read your screen number and divide it by the total to estimate your share

  1. Watch the hashrate box on the mining screen for a few minutes and write down the middle value and the usage (%)
  2. Divide the MH/s by 1,000 to get GH/s, then divide by the NETWORK value on a pool site's front page (about 14,670 GH/s as of the morning of November 15, 2026, estimated from difficulty)
  3. Also put your hashrate into a pool site's profit calculator to see the 24-hour, 7-day and 30-day estimates. Electricity is not included, so work it out separately with the electricity cost method
  4. Send "card name, hashrate, usage, mining program name and version" through the tip page, and I will sort the card numbers as they gather. You don't need to write a wallet address
  5. How to read the total hashrate is in what is hashrate, and what kind of coin SASEUL is, is in SASEUL basics

Sources


I hold SL. I opened the pool sites and the official explorer myself at around 4:24 a.m. on November 15, 2026 to check them, and the single-card numbers are values copied from the mining program's records.

Questions after reading this

Leave a question you want answered. Useful ones are added to this post with an answer. Please do not include your name, contact details, wallet address or recovery phrase.