SASEUL miner stopping by itself? It shuts down when the pool doesn't answer, and you have to restart it yourself

· Setup

SASEUL miner stopping by itself?

It shuts down when the pool doesn't answer, and restarting is up to you

Sends a share to the pool

One piece of proof of work

Shuts down 13-20 s later

GPU Miner stopped

Doesn't restart itself

Stopped until you notice

Press Start mining again

Check once a day

The common pattern in the 8 self-shutdowns in a mining program log from one graphics card (August 18 to October 9, 2026). Why it shuts down happens inside the program, so I couldn't confirm it.

The SASEUL mining program can stop by itself. In a log from one graphics card run from August 18 to October 9, it shut itself down 8 times.

All 8 times, it happened after it sent a share (proof of work handed to the pool) and the pool didn't answer. The stopped miner didn't start up again on its own.

So the fix is simple. Check the status once a day, and if it's stopped, press Start mining again.

Of the 19 stops in the log, 8 happened with nobody turning it off

The mining program writes what it does, one line at a time, to a log file (miner.log). The log shows mining stopped 19 times.

11 of those were someone pressing the stop button. In those cases, "lock set to 0 - exit" appears on the line right before it stops.

The other 8 don't have that line. They were September 22, September 27, twice on October 3, October 4, and three times on October 6.

All 8 times it sent a share, got no answer, and shut down 13-20 seconds later

Right before shutting down, all 8 looked exactly the same.

  1. A "share found, submitting" line appears
  2. No line saying the pool accepted it (accepted) comes back
  3. 13-20 seconds later, "GPU Miner stopped" appears

It sent a share to the pool (a group that mines together and splits the coins) and ended without getting a reply. It's like making a phone call, the line goes silent, you hang up, and you never call back.

In October, slow answers from the pool went way up

The log also has lines saying "The read operation timed out." That means a reply from the pool took so long that the program gave up waiting. That's called a timeout.

Through September, timeouts were 0 to 26 a day. From October 1 they went up to 41 to 164 a day. The worst day was October 3.

6 of the 8 self-shutdowns are bunched between October 3 and 6. So my guess is that a connection problem with the pool came up and the program couldn't get past it and quit. I can't see inside the program, so I couldn't confirm that.

It wasn't sleep mode. The computer was awake

When a computer goes to sleep (sleep mode), mining stops too. So that's the easy first suspect.

The computer this log came from was set to never sleep while plugged in. There was no sleep record in the last two days either. So I don't think sleep had anything to do with these stops.

Time lost without noticing was over an hour at the longest

After shutting itself down, it stayed off until someone noticed and turned it back on.

While it's stopped, no shares build up at all. The pool pays out by accepted shares, so you lose your cut for that time. What a share is, I explain in what shares mean.

You can tell whether it stopped from the status field on the Mine tab

If you closed the window, click the miner icon next to the clock at the bottom right of the screen to open it. If you can't see the icon, click the up arrow (^) next to it.

If the Mine tab status says Mining and the ACCEPTED number (shares the pool accepted) is going up, it's mining.

Mine tab of SASEUL Miner. Status is Mining, GPU use 25%, ACCEPTED 2. The receiving address and computing speed are hidden
The SASEUL mining program while it's mining. The status field says Mining and the ACCEPTED number goes up. I've hidden the receiving address and computing speed.

If the status field says Stopped, it's stopped. Below is the before-start screen from the install screens post. A stopped miner shows the same word in the status field.

Mine tab of SASEUL Miner before starting. Status Stopped, address field and OK button, Start mining button, GPU share mining may use 25% on the right
The SASEUL mining program with the status field at Stopped. Press the orange Start mining to mine again. This was taken before starting during setup, so the address field is empty.

확인Does the Mine tab say Mining, with the ACCEPTED number going up?

예It's mining fine. Check again at the same time tomorrow.

아니요
  1. Press the orange “Start mining” again. If the address field is empty, paste your address and press “OK” first.
  2. 그래도 안 되면Check that it says online next to POOL at the bottom left. If it says unreachable, check that your internet works and that the pool site opens.
  3. 그래도 안 되면If it shuts down several times a day, let the pool's Telegram know, as in the "Telling the pool" section below.
Checking and restarting from the black window (Command Prompt)

These are commands from the mining program's help. Use them in the folder where miner.exe is.

miner.exe status

This shows the current status.

miner.exe log

This shows the log. If "GPU Miner stopped" is near the end and there's no "lock set to 0" right before it, it shut itself down.

miner.exe start

This starts it again. The address is saved after you enter it the first time. The pool site's guide also says you can just type start after that.

Telling the pool helps you find out if the timeouts are just you

At the end of the pool site's question list there's "Ask on Telegram." It leads to the SASEUL Mine Telegram (t.me/saseulmine).

When you report it, it helps to send the date and time it stopped, the last few lines of the log, and the program version. If your wallet address shows up in the log, delete it before sending. The version is shown at the very bottom of the pool site, like miner v0.9.2.18.

Opened on the web, it shows up as a channel (notice board) preview. I couldn't confirm whether anyone can post there. For SASEUL coin mining in general, see the mining guide and SASEUL basics.

So what should you do? Check the status once a day, and restart it if it stopped

  1. Look at the Mine tab status field once a day at a set time, like in the morning or before bed
  2. If it says Stopped, press the orange “Start mining” again
  3. If it shuts down several times a day, send the date and time and the last few log lines to the pool's Telegram
  4. You can also use a Windows scheduled task to start the miner at set times. That's a setting that stays on the computer, so it's up to whoever owns the computer

Wondering whether blocks are still piling up on the SASEUL ledger? → How to check that blocks are being added

Sources


I hold SL. I counted the stops and timeouts from the mining program log for August 18 to October 9, 2026, and opened the pool site and Telegram address myself on October 9 to check them.

Questions after reading this

Leave a question you want answered. Useful ones are added to this post with an answer. Please do not include your name, contact details, wallet address or recovery phrase.