[SL Trading Walkthrough 3/5] How do you connect a wallet to Hyperliquid and add USDC to buy SASEUL SL?

How do you connect to Hyperliquid?
Connect the wallet, then sign twice
1 Connect
Choose MetaMask
2 Agree to terms
One signature
3 Turn trading on
One signature
4 Add USDC
Only if you want to buy SL
This is post 3 of 5 in the "SL Trading Walkthrough" series. The earlier posts are ① Creating a MetaMask wallet and ② Connecting to Lubics and sending SL. The next post, ④ Buying and selling SL on Hyperliquid, covers buying and selling SL.
Connecting is easy. On Hyperliquid your wallet is your account, so there's no sign-up. You just press "Connect" with MetaMask. This post is a record of the screens as I went through them myself. What Hyperliquid is is covered in the intro post, and if SASEUL coin (SL) is new to you, you can read the SASEUL overview first.
What do you need before you start? Chrome and a MetaMask wallet
- A PC with Chrome and a MetaMask wallet. If you don't have one yet, start with the MetaMask setup guide
- If you're moving SL over through Lubics, connect with the same MetaMask account you used in post ②. If you already connected in ②, you can start from the terms-agreement step
- If you want to buy SL, you need USDC (a coin made to stay equal in value to the US dollar) to pay with. Later in this post we'll look at the way to get it
How do you connect to Hyperliquid? Choose MetaMask under "Connect"
- Click app.hyperliquid.xyz or type it into the Chrome address bar yourself. Don't get there through a search result link
- Press "Connect" at the top right. "Connect" is the button that lets this site recognize your wallet address. Money doesn't move just from this. Hyperliquid's official docs also describe the order as choosing a wallet and then allowing the connection
- In the "Connect" window that appears below, press "MetaMask." Since Hyperliquid uses your wallet as your account instead of a sign-up, this step is just choosing which wallet to come in with. Don't press "Log in with Email" above it.
- When the MetaMask window opens, check the name "app.hyperliquid.xyz" and the verified mark. Also check that the account (such as "Account 1") is the one you want to use
- In the permissions box, "See address, account balance, activity" and "Send transaction requests" are ticked, and "Move funds without permission" has an X. That means it can't move your money without your approval
- Press the black connect button at the bottom (the Korean MetaMask screen shows "연결"). Be careful not to mix it up with the cancel button next to it ("취소")
What about the referral code and terms? Turn the code off, tick both boxes, and press "Accept"
As soon as you connect, another MetaMask window titled "MetaMask x Hyperliquid" opens. The text on it says you can save up to 4% when trading with MetaMask's referral code, and below that there's a checkbox saying MetaMask is allowed to add a referral code and that once added it can't be changed. I turned this checkbox off and went on. Read it and decide for yourself whether to add the code.
What is a referral code?
A referral code is an invite code that someone who already uses the service hands out. Hyperliquid's official docs (Referrals) say that with a code, your trading fees are cut by 4% on your first $25 million of volume, and the person who made the code gets 10% of the fees paid by the people who use it. I couldn't confirm whose code MetaMask adds or who receives the reward.
- Check that the box is unticked, then press the black confirm button below (the Korean screen shows "컨펌")
- The Hyperliquid screen shows "Terms of Use, Privacy Policy, and Cookie Policy." These are the rules for using the site and how it handles your information. There are two boxes. The first says you've read and agree to the terms and privacy policy, and the second is for cookies (small records the site uses)
- Read it, tick both boxes, and the teal "Accept" button lights up. Press it. If you don't want to agree, press "Decline" above it
- Next a "Signature request" appears in MetaMask. Check that the requester is "app.hyperliquid.xyz" and that the primary type in the message is "Hyperliquid:AcceptTerms." The interaction target is "0 ETH"
- If it matches, press the black confirm button ("컨펌" on the Korean screen). This signature is a record that you agreed to the terms. A signature isn't writing words. It's stamping "I made this agreement" with your wallet's secret key. Because the interaction target is "0 ETH," no money leaves with this signature
How do you turn trading on? Press "Establish Connection" and sign
Once the terms signature is done, an "Establish Connection" window appears. Its text means the signature is gas-free and opens a channel for trading right away without fees. Put simply, it's the step where you use your wallet to say "it's fine to start trading on this site." The official docs also say trading on Hyperliquid doesn't cost blockchain processing fees (gas) and that gas is only needed when you deposit. There can still be separate trading fees. A "Stay Connected" checkbox is shown below as well. I couldn't confirm exactly what it does, so I left it alone.
- Press the teal "Establish Connection"
- A "Signature request" appears again in MetaMask. The primary type is "HyperliquidTransaction:ApproveAgent" (approve a trading agent). The requester is "app.hyperliquid.xyz" and the interaction target is "0 ETH"
- Check the requester and press the black confirm button ("컨펌" on the Korean screen). The official docs say a gas-less signature window opens when you press "Enable Trading"
What does the ApproveAgent signature allow?
I found what ApproveAgent (approving an agent) means in the official docs (Nonces and API wallets). The docs say that once an account owner approves an "API wallet" (also called an agent wallet), that wallet can sign on the owner's behalf. They also say this wallet is only for signing. So my guess is that this signature picks one wallet to handle trading signatures, so a wallet window doesn't pop up every time you place an order. But that document is written for developers, and I couldn't confirm that this screen does exactly that. If you're not sure, stop at this step and read the official docs first.
Why do you need USDC? To buy SL, you pay in USDC
The SL trading pair on Hyperliquid is "SL/USDC." Once connected, you'll see "SL/USDC" at the top of the first screen.
For getting USDC, this post covers only the "Fiat" (buy by card) screen inside Hyperliquid.
How do you open the deposit window? Press "Deposit"
- Once connected, press "Deposit" at the top. It's the button that moves USDC from your wallet into your trading balance inside Hyperliquid. The official docs say deposited USDC arrives as USDC inside Hyperliquid (HyperCore)
- A "Deposit USDC from Arbitrum" window opens. Arbitrum is one of the blockchains (record books) that USDC moves across. Hyperliquid's docs present depositing USDC through Arbitrum as the main route. At the top it says "A 0.2 USDC fee will be deducted from the USDC deposited." That means 0.2 USDC comes out of what you deposit as a fee. I couldn't find in the official docs why it's 0.2
- "Deposit Chain" below is where you pick which blockchain to send USDC from. It's set to "Arbitrum." If you press it, you see "Arbitrum," "Arbitrum (Legacy Bridge)," "Arbitrum (Swap USDT for USDC)," and "HyperEVM." The official docs call the Legacy Bridge an old method that's no longer recommended (deprecated). They say HyperEVM is a separate area used within Hyperliquid. "Swap USDT for USDC" looks, from its name, like a way to swap USDT into USDC as you deposit, but I couldn't confirm that. I left the default "Arbitrum" as it was
- "Amount" is where you type how much USDC to deposit, and "MAX" next to it is the most you can deposit, based on what's in your wallet. The official docs say that to deposit straight from a wallet you also need some ETH on Arbitrum (for the deposit fee). The docs' note on the old bridge also says the minimum deposit is 5 USDC and that anything less won't be credited. I couldn't confirm that the current screen uses the same limit, but I think depositing 5 USDC or more is the safer side. If your wallet has no USDC, "MAX: 0.00" shows next to "Amount." When I typed 10, the button changed to "Insufficient Funds"
How do you buy USDC by card? Choose "Fiat" in the "Asset" list
- The "Asset" box in the deposit window is where you choose what kind of money to deposit with. Press it. The list shows names like "USDC," "USDT," "Fiat," "BTC" and "ETH"
- Press "Fiat" (fiat currency, meaning buying with ordinary money like dollars or won)
- In the "Deposit Fiat" window, a payment service screen from "swapped.com" opens. It's an outside payment service used from within Hyperliquid. Hyperliquid isn't taking your card itself. This service's screen opens in its place. I couldn't confirm what kind of company swapped.com is, because its about page wouldn't open
- The "Pay" amount at the top (the Korean screen shows "지불 금액") is what you pay, and the "Receive" amount below it ("수령 금액") is the USDC you get in return. Enter what you'll pay and the USDC you'll receive appears. The first screen shows that paying 100.20 USD gets you 100 USDC. You can also pick an amount with the "$100," "$200," "$500" and "$1k" buttons below
- To change the currency, press the "USD" box. In the "Select currency" window ("통화 선택"), find KRW (Korean won). In won, 100 USDC showed as 144,546 won. Exchange rates change all the time, so open it yourself and check
- "Payment method" ("결제 수단") is how you pay. Choose below. The list shows "Card," "Apple Pay," "Neteller," "Google Pay" and "Skrill" under "Popular in South Korea," and all are marked "0% fee." "Card" is paying by card, and "Apple Pay" and "Google Pay" pay with a card registered on your phone. "Neteller" and "Skrill" are names of online payment services, but I haven't used them so I don't know the details. I couldn't confirm whether "0% fee" also covers the cost built into the USDC price or the currency exchange
- Press the teal button at the bottom that carries the name of the method you chose, such as "Buy USDC via Card" (on the Korean screen it reads "구매 USDC 경유 Card"). This button starts the actual payment, so read the amount once more before you press it
The numbers on the screen are the values from the day I tried it, and I couldn't confirm the minimum deposit on the screen. This post also has nothing on how long it took for the deposited USDC to land in my Hyperliquid balance. The captures I have go up to the payment window and the "waiting for payment" screen, and I don't have a payment-complete screen. So I can't write what it looks like after completion. Once the USDC arrives, check whether a USDC row appears in Hyperliquid's "Balances."
What if you get stuck?
My card payment doesn't go through. It differed by card
Of the cards I tried, one was refused as a brand that isn't supported, and another was rejected by the payment service with "Invalid Card details." Another failed because its merchant type was blocked. One card worked after I raised its cash-advance limit from 0 won to 100,000 won in the card company's own settings (a setting on a South Korean card). A card that works this way is processed as a cash advance, so the card company may charge fees or interest. Check your card statement after paying. Since it differs by card, if you get stuck once, I'd suggest trying another card or another payment method such as Google Pay. Only your card company can tell you why a limit applied.
I chose a card and the currency changed. Look at the amount again
When you change the payment method, the currency can switch among USD, KRW and EUR. Before you press the buy button, read the currency next to the paid amount and the USDC amount you receive once more.
I pressed "Connect" and MetaMask didn't open. Click the Chrome extension icon
Click the MetaMask (fox) icon at the top right of Chrome and see whether there's an open request. If it's locked, unlock it with your password first.
The requester in a signature window is an unfamiliar address. Don't press anything
If the requester isn't app.hyperliquid.xyz, press "Cancel" and close the window. There can be fake sites with similar names, so type the address into the address bar yourself and open it again.
So what should you do? Connect first, and try USDC with a small amount
- Click app.hyperliquid.xyz or type it into the address bar yourself
- Under "Connect," press "MetaMask." Don't press the email login
- In each signature window, check that the requester is app.hyperliquid.xyz, then press confirm
- To buy SL, get USDC through "Fiat" under "Deposit." Read the amount and currency again, and start small
- Buying and selling continues in ④ Buying and selling SL on Hyperliquid
Sources
- Hyperliquid · trading screen · Connect window, MetaMask connection request, terms agreement, Establish Connection, Deposit window (0.2 USDC fee, Deposit Chain list, Fiat in the Asset list), swapped.com card purchase screen (payment method list, 0% fee label); checked by trying it myself, 2026-10-27
- Hyperliquid Docs · How to start trading · order of Connect and Enable Trading, gas-free signature, Deposit and USDC/ETH on Arbitrum; original text checked 2026-10-28
- Hyperliquid Docs · Referrals · 4% referral discount and 10% reward; original text checked 2026-10-28
- Hyperliquid Docs · Nonces and API wallets · an API wallet (agent wallet) signs on the owner's behalf; original text checked 2026-10-28
- Hyperliquid Docs · USDC · the Legacy Bridge is an old method, the old bridge's minimum deposit is 5 USDC; original text checked 2026-10-28
- Hyperliquid Docs · HyperCore · HyperCore versus HyperEVM; original text checked 2026-10-28
- Arbitrum docs · Arbitrum introduction · Arbitrum is a blockchain platform; original text checked 2026-10-28
- SASEUL official Telegram notice "SL Now Available on Hyperliquid" · SL trades as a spot asset on Hyperliquid, run separately from the SASEUL team; original text checked 2026-10-27
I hold SL. I checked the Hyperliquid connection and deposit screens by trying them myself on October 27, 2026. I couldn't confirm the card payment-complete screen or how long it takes for USDC to arrive. I opened the notice's original text again the same day to check it.